Teak World

Menu
0
0

Teak World Product Care

Care for your product

At Teak World, we believe that assisting you in the aftercare of your furniture is quintessential to a good customer experience. Our handcrafted products are all unique, with no two furniture having the same wood pattern. So, for you to enjoy your products to the fullest of their longevity with all their beauty, knowing how to care for them is key. This is why we have drafted this guide to help you on your journey.
The product care provides a general guide applicable to all products under the same section. For more specific guidelines on wood care, we recommend consulting the wood glossary.
In case you have further questions regarding your product, please feel free to contact us and we will gladly help in any way possible.

Wood
Upholstered
Recliners
Patio Furniture
Wicker Furniture
Glass-top
Ceramic-top
Mattresses
Wood Glossary
Extensible/Lift-top
Aluminium Frames

Wood

  • Knots are a common characteristic of wood; they are a natural consequence of branches growing out of tree trunks.
  • All wooden furniture, with time, change colour due to light and use.
  • Wood is sensitive to changes in moisture and humidity rates. This may lead to expansion and shrinkage in the wood over time.
  • Sudden and extreme temperature changes are to be avoided as much as possible (for example, placing the furniture directly under an air conditioner or heater etc.) as this may cause the wood to crack or warp. It is also advisable to avoid rooms subject to extreme temperature changes for the same reasons.
  • Prolonged direct exposure to sunlight will cause the colour of the wood to mature or change. Should the furniture set be placed in an area well exposed to sunlight, it is advised to interchange their positions and move the ornaments on top occasionally, so as to minimise noticeable colour differences and promote a uniform fading throughout the whole set.
  • The humidity levels should be kept from fluctuating too much and maintained around 40%-60% as much as possible.
  • Indoor wood furniture should not be used outdoors as their finish is not designed for this type of use.

Cleaning and Care

  • Dust your furniture regularly with a soft cloth or similar duster, working in the direction of the grain.
  • Treat spills immediately in a blotting motion to avoid staining.
  • The furniture may be cleaned with a cloth dampened in a weak solution of water and dish soap, making sure not to saturate the wood. Wipe off the furniture with a clean dry cloth right after, working in the direction of the grain.
  • For furniture with oil or wax finishes, avoid using a wet cloth as this may raise the grain.
  • Furniture polishes and other recommended care products can be used occasionally but in adequate amounts to prevent product build up on the wood and ensure that the polish is suitable for the material.
  • Avoid silicon based polishes or abrasive cleaners such as mineral acid or bleach which may damage the furniture. Also avoid use of steel wool or sandpaper or any material that may scratch the surface during cleaning. In case of scratches, kindly contact a specialist to take care of the damage.
  • It is recommended to test any product used on a small, discrete section of the furniture to ensure that no damage is done to the surface.
  • Ensure that no liquids nor floor cleaning solutions get onto the base of the furniture as it may leave permanent marks to the surface.

Good Practices

  • Avoid placing hot or wet items directly on the surface. Instead, make use of table mats, tablecloths and coasters to prevent stains and protect the furniture from heat.
  • Periodically check and re-tighten any fixtures and fittings on your furniture.
  • Prefer lifting your furniture when relocating instead of dragging it. Dragging may damage the legs of the furniture as well as the floors of the home.
  • Place potted plants in a tray before arranging onto the furniture to ensure that there is no water leakage on the surface. 

Environment

  • Prolonged and direct exposure to sunlight is not recommended as it will promote rapid fading of the fabric or leather.
  • Avoid exposure to humidity which can cause damage to both the frame of the furniture and its upholstery.
  • The furniture should be placed away from direct heat sources such as heaters to prevent the leather and wooden frames from drying out and cracking. Fumes from kitchen stoves can also contribute to deterioration of the upholstery.
  • Indoor furniture should not be used outdoors as their material is not designed for this type of use.

Frames and Structure

  • Prefer lifting the furniture from the base instead of dragging, pushing or pulling it across the floors as this can damage both the frame of the furniture and the floors. Also avoid lifting it by the armrests.
  • Avoid heavy weight and excessive pressure on the arms and backs or sitting on edges of cushions or arms. This can lead to premature wear of the upholstery, distortion in the padding or damage to the structure.
  • Frames are well-padded with a combination of resilient polyurethane foam and Dacron which can shift or settle during packaging and transportation. This is quite common on arms and corners and it may be necessary to adjust or gently push the foam back to its original position.
  • Fluff and plump the cushions daily to allow them to maintain their original shape and prevent creasing. If possible, regularly rotate cushions so that there is uniform wear throughout the furniture.
  • It is common for new furniture with polyurethane foam to be stiff upon purchase and it will take up to 3 months of use for the foam to soften and be ‘worn in’. This can also cause the fabric or leather to crease which is normal.
  • Aside from direct sunlight, certain medications such as skin treatments or oral medications which can transfer through the skin can also have a bleaching effect on the fabric, causing it to fade. To lessen this impact, it is recommended to have the furniture professionally steam cleaned on a regular basis.
    Ensure that no foreign substance such as makeup, dyes/self-tanning products or hair products come in contact with the fabric. Additionally, making use of throws or covers can help limit soiling from sweat, dead skin cells, greasy hair or other similar bodily functions.
    Newspaper ink can transfer onto the fabric; therefore, it is advisable not to place them directly on the furniture. Also be mindful of non-colourfast materials such as denim which can stain the furniture.
    Arm rests are more prone to wear. Protective arm caps or covers are recommended to limit such impact in this area.
    Avoid letting pets onto the furniture.

Care and Cleaning

  • It is advisable to vacuum the furniture once a week to clean it from accumulated dirt and prevent soiling, being mindful of the small decorative details that it may have. A small soft brush can also be used to periodically remove dust, ensuring not to apply too much pressure on the fabric so as not to damage it.
  • Treat spills immediately by blotting with a clean, dry cloth to prevent staining. Do not rub the affected areas. Gently pat with a damp cloth in case of stubborn stains and avoid laundering dried stains. Instead, gently brush the stained area and vacuum any dried residue.
  • Only use recommended upholstery fabric cleaners and avoid household detergents and spray polishes. It is strongly advised to test any care product on a small, discrete section of the furniture to ensure its efficiency.
  • It is recommended to have the upholstery professionally cleaned once a year to keep it in optimal condition.
  • Clean removable covers together to prevent colour variations and promote uniform wear throughout the covers. Professional cleaning is usually recommended.
  • Should the covers be cleaned at home, washing machines are to be avoided as they can cause the covers to shrink. Each cover is carefully tailored to a cushion therefore it is important not to mix them up. Replace the covers when still slightly damp, not wet, after washing to reduce chances of shrinkage on drying and allow them to sit on the furniture for some time.

Common Characteristics

  • As leather is a natural material, scars (e.g. insect bites), creases and variations in colour (due to different rates of dye absorption throughout the hide) are to be expected. These do not affect the durability of the leather and contribute to the aesthetic of the material.
  • Leather ages and relaxes over time to adapt to the lifestyle of its user. Subsequently, minor creasing and wear is inevitable but will complement the furniture to give it a mature distressed look.

 

Care and Cleaning

  • Vacuuming the furniture once a week is recommended to prevent accumulation of dust and debris which may soil the leather, ensuring to make use of the adequate vacuum brush. Finish off with a cloth, dampened in water and allow the air to dry.
  • In case of butter, oil or similar grease stains, do not use water to wash off the stain. Instead, wipe off the surface with a clean dry cloth and allow the spot to fade.
  • Occasionally condition your furniture to remove build-ups of dirt and grime, only making use of recommended leather care products and avoiding household cleaners and detergents. Absolutely avoid soap, saddle soap, furniture polish oils, varnish or any other abrasive cleaner that may damage the leather.
  • It is strongly advised to test any care product on a small, discrete section of the furniture to ensure its efficiency.
  • Treat all spills immediately by blotting with a clean, dry cloth to prevent the spills from getting absorbed into the porous leather. Do not rub the affected areas. Gently wipe with a damp cloth, if necessary, finishing off with a dry cloth.
  • Avoid placing heavy and/or sharp objects onto the furniture.

Upholstered

Recliners

  • Never move the furniture when the footrest is not locked in the closed position.
  • It is recommended to regularly oil the reclining mechanism to ensure the smooth running of the recliner and prevent permanent damage.
  • Fully recline the furniture before vacuuming it, in order to properly get into every nook and cranny and clean any debris that might have gotten stuck in the folds.
  • Clean the metal parts of the mechanism with a damp cloth. Solvents are not necessary and are to be avoided.
  • Avoid applying too much pressure on the open foot rest, as this will damage the mechanism.
  • Avoid tampering with the metal parts.
  • Ensure that the footrest is fully closed before standing up from the furniture.
  • Ensure that the user is properly seated when operating the reclining mechanism.
  • Keep body parts away from the reclining mechanism while operating it, to prevent injuries.
  • Before closing the recliner, ensure that there are no objects below the folding parts which can get swept and trapped under the furniture.
  • Before touching the mechanism or performing any cleaning/maintenance operations, make sure to unplug the furniture.
  • Keep all cords away from moisture or water, and temperature extremes at all costs. It is important to note that recliners are not designed for outdoor use and should therefore be exclusively kept inside the house.
  • Ensure that the necessary electrical connections are correctly secured and fitted before operating the recliner.
  • Avoid continuous use of the reclining mechanism for more than one minute. This action could cause the motor to cut-off due to overheating. Allow the system to cool down for 5 minutes to restore the motor to its correct working order.
  • Voltage fluctuations may cause the electric motor to cut off. In such cases, disconnect the plug from the wall socket, wait for a few minutes and then replace the plug in the wall socket.
  • To prevent overloading the furniture and power sockets, directly plug the recliner to the outlet, where possible, and avoid using extension cords.
  • Periodically ensure that power cords are in good shape and are not frayed or damaged. In such cases, it is strongly advised to contact a professional for repairs.
  • Prolonged and direct exposure to sunlight is to be avoided as it will promote rapid fading or damage the furniture.
  • To protect the furniture and prolong its lifespan, it is advised to store it in a dry location or sheltered under a roof or waterproof tarpaulin if possible.
  • Wipe down the furniture after rainy days to prevent formation of mould or similar damage brought about by humidity such as expansions and contractions in wood. It is however recommended to store the furniture indoors during extended periods of rain for the same reasons.
  • Do not close wet foldable furniture as they may get mouldy.
  • Regularly vacuum or brush off any debris on the furniture and proceed with cleaning as required.
  • Wipe down spills immediately to prevent staining. For fabric furniture, it is best to clean the entire surface area of fabric to avoid water rings and stains.
    Lightly spray the fabric to dampen it and clean with a mild solution of soap and warm water. Gently brush the solution into the fabric and allow it to sit for 2 minutes. Rinse off with clean water before wiping down with a clean dry cloth and allowing to air dry.
  • Remove cushions from furniture when not in use and store in a dry area, as they are more prone to damage than the frame.
  • Hand wash removal cushion covers in a gentle detergent and warm water, and allows air to dry.
  • In case of mildew and mould on the fabric/cushions, spray the area with a solution of 1 part, 16 parts water and ¼ part of mild soap (e.g. 250ml bleach, 4L water and 60ml of soap). Allow to soak in for 15 minutes and clean the surface with a sponge, towel or soft brush. Rinse thoroughly and allow the air to dry. NOTE: Make sure to test the solution on a small discrete section of the fabric to ensure that no important damage is done to the surface.

Patio Furniture

Wicker Furniture

  • Extended and direct exposure to sunlight is not recommended as this can damage the wicker fibres and cause them to crack.
  • The finish on rattan fibres will naturally fade in strong light. To evenly distribute the fading, it is advisable to regularly rotate the furniture.
  • Avoid exposure to humidity which can cause formation of mildew and mould. For areas with extended rain periods, it is recommended to store the furniture indoors during this time to protect it.
  • Wicker becomes brittle in the cold and dries out in severe heat. Sudden temperature changes are to be avoided as this can lead to premature tear of the rattan.
  • Limit exposure to high winds which could structurally damage the weave of the wicker.
  • It is strongly recommended to carefully remove the cushions or glass-top on the wicker before attempting any cleaning or care.
  • Regularly dust the furniture to prevent build-ups of dust, as this can collect mildew which can cause the fibre to break and natural rattan to decay.
  • Always vacuum or brush the rattan before cleaning it, especially in the crevices of the weave, to remove debris or accumulated dust. A small toothbrush can be used to better clean in between the weave.
  • Treat spills immediately with a clean absorbent cloth, as rattan is porous and will absorb stains.
  • Occasionally inspect the weave of the wicker to ensure that it is tight and in place. In case of damage, it is recommended to seek help from a professional.
  • For outdoor wicker, it is best to keep it covered when not in use to protect it.
  • Avoid dragging the furniture to prevent the fibres from splitting. Instead, it is strongly advised to lift the furniture when moving it.
  • In case the fibres start to dry out, the rattan can be treated with Tung oil, lemon oil or boiled linseed oil. Gently wipe off the excess and allow it to air dry for a few days before use. To be noted that lemon oil should not be used on white or whitewash finishes.
  • Before using any detergent or care product on the rattan, make sure to always test it on a small discrete section of the furniture to ensure no damage is done to the surface or finish.
  • Though they can be used outdoors, natural rattan is porous making it more sensitive to moisture and rotting. Therefore, a lot of care is required compared to synthetic rattan and it is preferable to keep natural wicker indoors, under covered areas or limit its exposure to the elements.
  • Due to its sensitivity to sunlight, it is recommended to cover the furniture when left outdoors or bring it back inside after each use.
  • Avoid overexposing the furniture to water, humidity or moisture as this can cause the rattan to expand and eventually start rotting. When cleaning with water, it is important to tilt the furniture to ensure that no moisture gets trapped between the weave.
  • Similarly, avoid over washing the rattan furniture. Regular dusting or vacuuming should help keep it clean.
  • If a deep clean is required, once the furniture has been vacuumed or dusted of all debris, a washcloth can be moistened in a mild solution of soap and water and the suds or bubbles used to wipe the rattan. You may also spot scrub using a toothbrush as this does not hold a lot of water. Wipe down the furniture with a clean damp cloth until all soap and excess water is removed, and allow to thoroughly dry. Make sure not to soak the rattan as much as possible as this will cause the rattan to sag or warp.
  • Allow the furniture to be completely dry before sitting on it or placing back the glass-top.
  • Do not hose down natural wicker.
  • In the case of mould or mildew, use a toothbrush soaked in a solution of 80% water and 20% bleach to scrub the affected area.
    With a clean soft cloth, wipe down the furniture to remove any unwanted smell and prevent proliferation of spores.
    Rinse the furniture with clean water and thoroughly dry off with a dry towel, ensuring to remove as much moisture as possible.
    Allow the furniture to completely dry before use.
  • When deep cleaning, ensure that the wicker has been vacuumed from dust or debris before using any care products or liquids.
  • Synthetic rattan can be cleaned following the similar steps as for natural rattan.
    Using a bowl of warm water and a light cleaning agent (e.g. soap), dip a soft cloth into the bubbles and wipe down the furniture. A small toothbrush can be used to clean into the crevices.
    With a clean damp cloth, wipe the rattan until all suds are removed and allow to dry thoroughly before use.
  • In case the furniture is extremely soiled, it may be deep cleaned by hosing it down, scrubbing it with the above recommendations and then rinsing it down with the hose again. Ensure to hold the hose or jet sprayer at least 1.5m away from the furniture and to use the lowest setting on the jet sprayer.
  • Do not sit on the glass nor place heavy objects on the surface.
  • When moving the furniture, it is recommended to lift it by the base, being mindful not to grab the glass to carry the furniture. Avoid dragging the furniture.
  • Make use of coasters and placemats to avoid staining the glass.
  • Avoid throwing or dragging sharp objects onto the surface as this will scratch the glass.
  • When not in use, cover the furniture to prevent dust build-up and protect the surface from scratches.
  • Clear rubber bumpers are recommended to hold the glass in place and prevent it from slipping from the furniture. They are to be placed underneath the glass, right on top of the table and the amount needed will vary depending on the size of the table.
  • Regularly dust your furniture to prevent dust or similar abrasive particles from accumulating.
  • It is important to never dry-clean glass. Always use a good quality cleaner applied on the surface or on the towel used. Not using any liquid to clean dirty glass may cause scratches.
  • For sensitive surfaces, natural cleaners such as lemon juice or white vinegar are recommended instead of store-bought ones as they are more gentle on the glass.
  • Always wipe the surface after using any cleaning solution to prevent streaks from forming. A microfiber cloth, paper towel or crumbled newspaper can be used to shine it.
  • Do not overuse cleaners and ensure that the solutions do not get onto the non-glass material such as the frame or underneath the glass.
  • Periodically clean the underside of the table to get rid of debris or dust build-ups.
  • Avoid vacuums to clean glass-top furniture as it can damage it.
  • Steel wool can be used to scrub out any hard to remove dirt, but never dry. Always make sure to add a cleaning liquid on the wool to prevent damaging the glass.
  • Steel wool should only be used on clear glass and never on frosted or tempered glass as this will scratch the surface.

Glass-top Furniture

Ceramic-Top Furniture

  • Avoid heavy impact to any unsupported ceramic areas and the ceramic edge.
  • Do not sit on the furniture.
  • When moving the furniture, it is recommended to lift it by the base, being mindful not to grab the ceramic-top to carry it. Avoid dragging the furniture.
  • Make use of coasters and placemats to avoid staining the glass.
  • When not in use, cover the furniture to prevent dust build-up and protect the surface from scratches.
  • Regularly dust your furniture to brush off loose dirt and periodically wipe with a clean microfiber cloth and a solution of mild soap and water.
  • Blot spills immediately, particularly liquids that are likely to stain the surface. In case of stubborn stains, a clean cloth with a mild detergent and water can be used. Wipe dry to prevent formation of water spots.
  • Avoid any abrasive or ammonia-based cleaners that may damage the surface. It is recommended to test any care product on a small discrete section of the furniture before cleaning, to ensure that it does not harm the ceramic.
  • Ceramic does not require high maintenance therefore over-cleaning with soap and water is to be avoided.
  • Lifting or moving the mattress without assistance is not recommended as this may lead to injuries. Never carry the mattress alone.
  • It is preferable to carry the mattress on its side when moving it and to avoid using the handles while doing so.
  • Never fold or bend the mattress as this may damage its structure. Always measure any passage or entry that it may need to go through to ensure that the mattress will not be distorted while moving.
  • Ensure that the mattress receives a supportive and structurally sound foundation on the base of the bed frame. This will protect the mattress from sagging and warping and promote utmost comfort.
  • It is strongly recommended to make use of waterproof mattress protectors to help extend the longevity of the mattress and keep it healthy and stain-free.
  • Do not jump on the mattress.
  • Body impressions are a normal occurrence on the surface of the mattress due to the mattress conforming to the user’s body weight and silhouette. To equalise impressions over time, it is advised to rotate the mattress regularly during the first 6 months of use and at least twice a year afterwards.
  • Regularly vacuum the mattress to get rid of dust and debris that may have settled on it.
  • It is recommended to frequently wash any bed sheet or blanket used as they naturally accumulate sweat, body oils, and other dirt, which can gradually penetrate the mattress if the bedding is not regularly changed.
  • Do not clean the mattress with water as this may promote the proliferation of mildew.
  • In case of spills and stains, it is recommended to spot clean with a soft cloth dampened in warm water and a mild detergent. Allow the mattress to completely dry before putting the sheets back on.
  • Aerate your mattress weekly to allow body moisture to evaporate and get rid of odours.
  • Baking soda can also be used to alleviate odours. Sprinkle over the surface and allow to sit for 20 minutes. Use a vacuum to clean the powder off the mattress.

Mattresses

Wood Glossary

Solid Wood

Characteristics

Strong, long-lasting and able to withstand extremes of heat and cold. Excellent option for outdoor and indoor furniture. Its straight grain, streaks or lines of darker colour, make it one of the most attractive woods to the majority of teak lovers.
Teak may weather over time and develop a silver-grey patina but this does not affect the durability and structure of the furniture. This can be showcased by the beauty of our reclaimed Teak furniture.
Made out of recycled Teak wood, reclaimed furniture are unique in appearance but just as sturdy. The wood is treated and polished to produce a soft touch and give character to the furniture.
Our most popular finishes for Teak furniture are the Whitewash (WW), Coffee mix (CM) and original (OR).

Care

For Teak furniture, linseed oil is not recommended. Instead, Teak oil is strongly encouraged to polish the furniture.
For reclaimed Teak furniture used outdoors, a marine grade varnish is recommended.
Avoid using high pressure jets for cleaning and refer to the wood cleaning guidelines for proper care recommendations.

Characteristics

A light blonde to medium tan hardwood, sometimes with medium brown streaks. It has a straight grain with a coarse, open texture which makes it prone to staining. Rubberwood is harder than other woods of similar nature but is not so resistant to heat, rot and fungus. Thereby, it is more commonly coated in finish to protect it.

Care

Rubberwood can be cleaned following the solutions proposed in the wood product care.
In case of intense soiling, prepare a solution of 1-part turpentine and 3 parts boiled linseed oil. Pour the mixture over a bucket of hot water and allow it to float to the surface. Dip a clean cloth in the solution and rub down the wood with it. This will get rid of encrusted dirt and partially seal the wood and protect it.
Since Rubberwood is greatly sensitive to heat, it is strongly advised to avoid placing your furniture in dry or hot places. Also avoid placing hot kitchenware directly on the surface as this can cause the wood to warp. Always ensure to use coasters and placemats.

Characteristics

Solid Elm furniture has a very distinct, interlocked grain which makes it resistant to splitting and gives it an unmatched strength compared to all other hardwood. It is relatively elastic and tough. Its shrinkage is minimal and it has a low natural durability.

Care

For Elm furniture it is recommended to follow the solutions proposed in the wood product care section.

Characteristics

Straight, fine grain relatively free of defects and knots. Highly durable and sturdy and has a deep reddish-brown colour which darkens over time. Resistant to rot and seasonal changes and does not expand or shrink due to humidity. Ideal for areas of high moisture.

Care

Excess cleaning should be avoided for mahogany furniture.

Abrasive lemon or silicone based cleaners should be promptly avoided as they can prove to be harmful to the furniture.

Mahogany should be polished periodically to maintain the shine of the furniture and adhering to the following instructions:

  • Always dust the furniture before polishing to remove any dust residue on the surface.
  • Spray the furniture with a solution of 1-part vinegar and 1-part water, and rub with a soft cloth to remove any previous layer of oil or wax and prevent product build-up.
  • Place a small dab of furniture wax on a clean cloth and buff it into the wood to bring out the shine.
  • Lastly, wipe off any excess wax on the furniture.

Characteristics

Oak takes between 150 to 200 years to mature. Hardwood and pale in colour, it ages over time and develops a rich patina. It has a very distinguished straight open grain and an uneven texture, with the rays running in the direction of the grain. However, with more than 300 types of oak, each variety has a particularity to its grain that differs from the other. Oak furniture is heavy, solid and of minimalist design.

Care

Oak furniture can be cleaned and cared for by following the solutions proposed in the wood product care.
Due to its open grain, oak furniture is more prone to stains. Therefore, more care is recommended to avoid spills such as making use of coasters and placemats.
To maintain the charm of the oak, it is recommended to wax the furniture every six months to nourish it and form a long lasting seal on its surface.
Always ensure that the furniture is dust-free before waxing. Apply a small amount of wax on a soft clean cloth and buff into the wood, working in the direction of the grain and applying even pressure. Allow to sit on the furniture for 4 minutes then wipe off the excess with a new clean cloth.

Characteristics

Made up of a thin surface layer of natural hardwood, bonded to a stable furniture-grade HDF/MDF or similar material, wood veneer furniture is a cost effective alternative to wood pieces. They offer the appearance and feel of solid wood furniture but with more affordable materials. Solid wood like oak, elm or Rubberwood are commonly used as veneer top and their grains will vary accordingly.

Care

Veneers can be cleaned and cared for by following the solutions proposed in the wood product care section.
After dusting, it is recommended to use a damp lint-free cloth to clean the surface, working in the direction of the grain. In case of stubborn marks, a dab of a mild soap can be used on the cloth to wipe the surface, ensuring to dry it

Characteristics

Similar to wood veneers, laminates offer a thin surface layer of synthetic coating, bonded to a stable furniture-grade HDF/MDF or similar material, giving the furniture a durable and resistant finish. They mimic the appearance and grain of natural wood but are synthetically made, rendering them cheaper and more scratch resistant than wood veneers.

Care

Laminates can be cleaned and cared for by following the solutions proposed in the wood product care section.
The furniture may be cleaned occasionally with a clean cloth soaked in a solution of mild soap and water. Avoid using hot water to clean the surface.
Since laminates are more prone to water damage, it is important to avoid over-cleaning with water and to prevent accumulation of liquids on the surface that may seep between the joints. Therefore, it is strongly advised to treat spills immediately and to always wipe the surface dry when cleaning with water.
Steel wool, hard bristle brushes or similar abrasive pads are to be avoided at all cost as they will scratch the surface. Similarly, avoid sliding rough objects over the surface to prevent scratching.
Furniture polishes and cleaners with wax, oil or bleach are not recommended as they may lead to discolouration of the laminate.

Wood Glossary

Engineered wood

Extensible/Lift-top Furniture

  • Avoid overworking the mechanism by excessively opening and closing the furniture as this can cause the metal arms to break.
  • Carefully lift or extend your furniture when operating it, ensuring that no heavy object is placed on the surface that can strain the mechanism.
  • Ensure that there is no obstruction on the mechanism before opening and closing the furniture. In case of blockage, do not try to forcefully close the furniture.
  • Deformations in the wood may make it difficult to extend or close the table properly. To ensure that the wood does not shrink or swell, it is important to respect the above care guidelines for wood furniture.
  • Treat spills immediately to avoid them from seeping into the slides of the furniture. Making use of tablecloths and placemats is advised to prevent food from slipping into the joints.
  • Regularly vacuum the crevices of the furniture with a small nozzle attachment to get rid of debris that may get stuck in the mechanism.
  • For stuck-on debris, a solution of warm water and a few drops of liquid dish soap may help to dislodge them. Wipe dry then vacuum any leftover debris.
  • Periodically apply lubricate the metal arms of the furniture to ensure that it slides smoothly. Wipe off any excess with a dry cloth to avoid over greasing the furniture and preventing the lubricant from getting onto the wood.
  • For stains on the metal arms, carefully scrub with a brush dipped in a solution of one part of acetone and one part of rubbing alcohol. Pat dry with a clean cloth.

While aluminium does not rust, it is still bound to weather with time due to exposure to sunshine and rain. To prevent severe oxidation, corrosion or pitting, it is important to care for your furniture regularly.

 

  • Prolonged and direct exposure to sunlight is not recommended as it will promote rapid fading or heat retention which may injure the user.
  • Avoid exposure to humidity which can cause the aluminium to corrode or oxidise. For areas with extended rain periods, it is recommended to store the furniture indoors during this time to protect it from corrosion and formation of mildew.
  • Regularly dust the dry furniture to get rid of debris that may soil or stain its surface and wipe down with clean cloth, dampened in warm water. Gently pat dry afterwards.
  • Always test any care product on a small discrete section of the furniture, to ensure no permanent damage is done to the visible surface.
  • Avoid alkaline based cleaners, ammonia-containing chemicals (e.g. window/glass cleaners, floor polishing waxes, bathroom cleaners, multi-surface cleaners or stainless steel cleaners) and any Trisodium Phosphate degreasers.
  • For mildew or similar stubborn stains, it is safer to carefully pressure wash the frame until the stains are removed. Alternatively, a solution of 1-part bleach and 4 parts of water can be used, though it is not recommended as this may change the colour of the metal. Make sure to test the solution on a small discrete section of the furniture to ensure that no permanent damage is done to the surface.
  • In case of signs of oxidation, it is recommended to use a solution of equal parts of white vinegar and water to clean the furniture. This may also work to remove some, but not all, stubborn stains such as bird sap.
  • For more severe signs of oxidation accumulated over time, use a stiff wire brush gently enough to remove loose debris and oxidation marks, but ensuring not to scratch the aluminium itself. For furniture with more intricate detailing, it is advised to make use of a smaller brush.
    Scrub the frame with a non-abrasive cleaning sponge soaked in a marine aluminium cleaner, ensuring to wear gloves. Rinse with warm water and pat dry with a clean towel.
  • Avoid washing the furniture too often to prevent oxidation. It is advised to regularly adhere to dusting it to prevent the need for this as well as making use of garden furniture covers.
  • If the furniture is not in use during winter, it is advised to store it indoors to limit sun damage. It is also best to get it deep cleaned during this time.
  • Occasionally check for chips and cracks in the powder coating of the furniture to ensure that no water penetrates the under layer and prevent irreparable damage.
  • It is recommended to periodically get your furniture professionally power coated, to minimise effects of corrosion and sun damage such as fading.

Aluminium Frames
Free Delivery

FROM ALL STORES

Warranty Service

PER PRODUCT RANGE

Customer Support

READILY AVAILABLE

Close
Wishlist
Wishlist page
Close
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SCode
  • Price
  • Content
  • Colour
  • Size
  • Description
Compare
Close
  • Mobile Menu
Close
Lost your password?
Close
Shopping cart